Suitable for Rolls-Royce & Bentley models between:

- 1965-1980 (From VIN 11800 onwards)

- 1980-2003 (From VIN 1001 up to 27798)

 

This information is taken from Workshop Manual TSD2476, Section H.

1. Remove the hub.

2. Lift out the bearing inner race from the outer bearing.

3. Using a screwdriver prise the grease retainer from the inner end of the hub and lift out the inner race of the inner bearing.

Note: Each grease retainer is clearly marked 'Off-side Right-hand' or 'Near-side Lefthand' to ensure that they are fitted to the correct side of the car.

4. Using a soft metal drift, drive out the outer races of the inner and outer taper roller bearings.

5. Thoroughly clean the hub and any components to be refitted.