BRAKE PUMP (5/16" union on high pressure brake pipe) (UE34327SXR)

  • Part Number: UE34327SXR
  • Suitable for: 1965-1972 RR Silver Shadow I & Bentley T1
  • Condition: This is a reconditioned part, sold on an exchange basis so a core unit surcharge will apply

This is a fully reconditioned brake pump with a 5/16" (inch) union on the end of the high-pressure pipe that fits to the top of the brake pump.

Our reconditioning process involves initially stripping the pump down so that every component can be deep cleaned and inspected for wear. The body is then Aquablasted, ensuring that any rust or contamination is removed. Special care is taken to ensure that the castellated section of the main body is serviceable. Very often the teeth are damaged. We refinish any damaged teeth in order to allow continued use of the correct fitting tool (RH8428). The unit is then rebuilt with brand new O rings (UE36747P & UE32170P), main spring (UR70731P), inlet valve (UE9491P), inlet valve spring (UE9672), washer (UE9488), spacer ring (UE9494), seating ring (UE35311P), non-return valve (UE44992P)and circlip (XB14183LP).

Once complete the unit is tested for full functionality on our hydraulic test rig which replicates, as closely as possible, the conditions that the pump would experience during normal operation on the vehicle. The finished pump is given a unique FS warranty number, which we log, and can refer to if needed.

This pump comes with a full 12-month guarantee. Prior to VIN 12400 (approximately) all cars were fitted with thin bore pipes between the brake pumps and the accumulator spheres. The brake pumps for these models were fitted with a 5/16" union on the high-pressure pipes. From VIN 12400 (approx) a thicker bore pipe was fitted which required larger 3/4" unions on the pipes between the pumps and the valve bodies. The larger bore pipes are recommended as a modification. Earlier models may, therefore, already have been upgraded so please check the union size on your pump prior to ordering.

Please contact us if you would like a kit to modify your car to the later thicker bore pipes. Very often problems with brake pumps and low system pressure are caused by wear on the lobe on the camshaft that activates the brake pump push rod. In order to try to rectify this problem without having to replace the camshaft (a very costly job) we have machined some flanges to be 0.030" (inches) thinner than the original (UE9490-0.030SXR). If your camshaft lobe is worn then we recommend fitting this flange and then shimming the flange in order to obtain the correct push rod heights.

US$260.58 US$312.70
- +
Ask a question about this product
Compare 3 Buying Options
Upsell Products
Product UE34327SXR ASSY PUMP (UE34327) BRAKE PUMP (UE34327SX)
Title BRAKE PUMP (5/16" union on high pressure brake pipe) (UE34327SXR) ASSY PUMP (UE34327) BRAKE PUMP (UE34327SX)
Price
US$260.58 US$312.70
Condition Reconditioned Genuine Genuine
Warranty Three Years One year as standard; two years if fitted by a franchised dealer One year as standard; two years if fitted by a franchised dealer
Part Number UE34327SXR UE34327 UE34327SX
Availability Contact Us For Lead Time No Longer Available No Longer Available
Product
- +
Out of stock
Out of stock

Browse the full range

  • 1965-1980 | Rolls-Royce Silver Shadow I, Silver Shadow II & Bentley T1, T2 Parts

Specifications

More Information
Part NumberUE34327SXR
Product ConditionReconditioned
Related Products RH9728 - UE31533 - UE34327 - UE34327SX - UE35167 - UE35167SX - UE35319 - UE35486 - UE35486SX - UE35488 - UE35623 - UE35623SX - UE36647 - UE40534 - UE40534SX - UE45237 - UG13279
Suitable for1965-1972 RR Silver Shadow I & Bentley T1
Warranty PeriodThree Years
  • All parts on our website are shown with their prices exclusive and inclusive of UK VAT (currently 20%)
  • All UK customers will automatically have VAT added to their orders
  • All customers from outside the UK will not have VAT added to their orders
  • Australian customers - The Australian government requires us to register for their Simplifed GST scheme which covers low value goods, online services and digital products. As such, we will charge 10% GST on all Australian orders at the checkout. This scheme only currently applies to orders that are below a threshold of $1000 AUD. If your final order is over $1000AUD we will refund any GST charged prior to despatch of the goods as it will be collected at point of entry into Australia
  • Flying Spares Ltd cannot advise on, or be responsible for, any Customs or Import Duties or Taxes that are subsequently imposed on your order once it arrives in your country. Please confirm what extra charges your order is likely to incur before confirming the order with us

Shipping & Delivery

As an international mail order company, our focus is to get parts to our customers as quickly and economically as possible. Where possible we will try to provide a choice of shipping options.

Our database knows the weight of every part listed on our website. In the majority of cases this allows automatic shipping options for each order to be chosen at the checkout. Unfortunately, penalties will be imposed by all shipping companies if a parcel is particularly large in size compared to its weight, this is commonly known as “voluming out”. This means that sometimes we are unable to accurately quote shipping for orders until we have packed the parcel and confirmed the shipping cost.

Please be aware that import duties and taxes may apply in countries outside of the European Union. All duties and taxes are set by the Customs Authority of the destination country and, as such, we have no control over them. Please note that it will be the responsibility of the customer to pay all duties and taxes.

Our two most commonly used methods of shipment are by the postal service and UPS.

We do, however, hold accounts with most major international couriers so please let us know if you have a preferred courier or if you would like us to ship using an account you hold with a specific courier.

Further information (including the ability to track a parcel) is available here:

If you would like to discuss a parcel with a member of our Logistics team please email us using: despatch@flyingspares.co.uk

Below is a guide to the standard postal and UPS shipping terms:

Shipping Guide for the UK

Service Destination Approx Delivery Time Type of Package Trackable Details
Royal Mail - 1st Class Post UK 1-2 working days, excludes Sunday Up to 2kg No  
Royal Mail - Tracked 48 UK 1-2 working days, excludes Sunday Up to 20kg Yes  
Royal Mail - Special Delivery UK Before 1pm next working day, excludes Sunday Up to 20kg Yes Guaranteed Saturday delivery available upon request
UK Courier - UPS UK 1 working day - excludes Saturday & Sunday (Guaranteed AM & Saturday delivery available) Up to 70kg Yes Longer delivery times for remote areas of UK eg Highlands & Islands, Isle of Man, Channel Isles

Shipping Guide for the Rest of the World

Please be aware that import duties and taxes may apply upon receipt of orders shipped outside of the European Union.

Such duties and taxes are beyond our control as they are set by the Customs Authority of the destination country and depend on a number of factors, such as country of origin of the purchased product, local VAT rates and local import taxes, and it will be your responsibility to pay them if and when asked to by your local authorities.

Service Destination Approx Delivery Time Type of Package Trackable Details
Post - International Standard Worldwide 5 - 15 days Up to 2kg No Visit the Royal Mail website for more information
Post - International Tracked & Signed Worldwide 5 - 15 days Up to 2kg Yes Visit the Royal Mail website for more information
Post - International Signed Worldwide 5 - 15 days Up to 2kg Yes Visit the Royal Mail website for more information
European Road Delivery - UPS Standard Europe 2 - 4 days Up to 70kg Yes Visit the UPS website for more information
European & ROW Air Delivery - UPS Express Saver Europe & Rest of the World 1 - 5 days Up to 70kg Yes Visit the UPS website for more information

VAT & Custom Duties

All parts on our website are shown with their prices exclusive and inclusive of UK VAT (currently 20%).

All UK customers will automatically have VAT added to their orders.

All customers from outside the EU will not have VAT added to their orders.

All customers within Europe who do not have an EU VAT number will have VAT added to their order.

All European customers with a valid EU VAT number need to register with us and quote their VAT number. The website will automatically validate your number and VAT will not be added to any orders you place with us.

Flying Spares Ltd cannot advise on, or be responsible for, any Customs or Import Duties or Taxes that are subsequently imposed on your order once it arrives in your country. Please confirm what extra charges your order is likely to incur before confirming the order with us.

Write Your Own Review
You're reviewing: BRAKE PUMP (5/16" union on high pressure brake pipe) (UE34327SXR)
Your Rating
Write Your Own Review
You're reviewing: BRAKE PUMP (5/16" union on high pressure brake pipe) (UE34327SXR)
Your Rating